Land Rover Defender: Brakes
READ NEXT:
Important information
Make sure the following warnings have
been read and fully understood. Failure
to follow the guidance given could affect
vehicle safety, leading to serious injury or
death.
If the red brake warning la
Electric parking brake
(EPB)
Do not rely on the Electric Parking Brake
(EPB) to hold the vehicle stationary if
the brake warning lamp is illuminated.
Seek qualified assistance urgently. A
faulty EPB system can lead to personal
Brake hold
The brake hold functions act on all four
wheels. Under the specified conditions,
the brake hold functions apply the
Electric Parking Brake (EPB)
automatically on the rear wheels only.
On steep or sl
SEE MORE:
Glass, Frames and Mechanisms - Description
DRIVER DOOR SWITCHPACK
NOTE:
RHD is shown, LHD is similar.
The driver door switchpack is powered by the DDM. When the switches in the
driver door switchpack are used, the
switchpack translates the switch movement into a Local Interconnect Network
(LIN) message. A LIN connects the
driver door swit
Main Wiring Harness - 110 - Installation
INSTALLATION
The following step(s) applies to:
All vehicles
1. Install the main wiring harness.
2.
Install the wiring harness grommet.
Install the 4 wiring harness clips.
Connect the 2 SOTA antenna link harness electrical connectors.
3.
Connect the 6 roof pod electrical connectors.
Instal
© 2010-2024 Copyright www.lrdefender.org
