Land Rover Defender: Opening the hood

Before opening the hood, make sure that the ignition is switched off and the smart key is removed from the vehicle.

Failure to do so can potentially result in serious injury or death.

1. Pull the handle, located in the left front footwell.
2. Pull the hood safety catch, located underneath the center of the hood at the front. Raise the hood.

CLOSING THE HOOD

Before closing the hood, make sure that no-one is obstructing the closing area and that hands and clothes are clear.

The closing hood may cause serious injuries.

Do not drive with the hood secured by the safety catch alone. If the hood opens while driving, it may lead to a collision, which may cause serious injuries or death.

When closing the hood, make sure to stand in front of the vehicle. Do not attempt to close the hood while standing at the side of the vehicle.

Doing so may result in incorrect latching of the hood, which may cause serious injuries or death.

To close the hood:

1. Using both hands, lower the hood and let it drop from a height of between 8 to 20 in (20 to 50 cm).

2. Try to lift the front edge of the hood, near both corners, to check that it is securely engaged.

3. If the hood lifts slightly, it is not properly latched. Open the hood again, and with a little more force, try again to close it.

UNDER-HOOD COVERS REMOVAL

The following steps describe how to remove the under-hood covers:

1. Release and remove the turnbuckle clips securing the covers.
2. Lift the edge of the covers and slide to remove.

UNDER-HOOD COVERS REFITTING

Before refitting the under-bonnet covers, make sure that no pipes, cables, or other items have been trapped between the cover and the casing.

To refit the under-bonnet covers:

1. Place the cover over the casing. Make sure that the holes are aligned.

2. Push the cover down firmly. Rotate the turnbuckle clips clockwise to fasten.

READ NEXT: