Land Rover Defender: Battery care
If swallowed, battery electrolyte can be fatal. Seek medical assistance immediately.
Do not allow battery electrolyte to come into contact with skin, eyes or clothes.
Battery electrolyte is both toxic and corrosive, which can result in severe injuries. If battery electrolyte comes into contact with skin, eyes or clothes, remove the affected clothing. Flush the skin or eyes with plenty of water. Seek medical assistance immediately. Failure to do so may result in serious injury.
Do not connect any 12V equipment directly to the battery terminals. Doing so may cause a spark, which can result in an explosion. A spark or an explosion may cause serious injury or death.
The cell plugs and vent pipe must be in place at all times when the battery is connected to the vehicle. Make sure that the vent pipe is clear of obstructions and not kinked. Failure to do so may cause a pressure build-up in the battery, potentially resulting in an explosion. An explosion may cause serious injury or death.
Do not expose the battery to an open flame or spark, as the battery produces explosive, flammable gas. An open flame or sparks may cause a fire or explosion, potentially resulting in serious injury or death.
Never jump start (boost), charge, or try to start a vehicle with a frozen battery.
Doing so may result in an explosion, potentially leading to serious injury or death.
Remove all metal jewelry before working on, or near, the battery. Never allow metal objects or vehicle components to come into contact with the battery terminals. Metal objects can cause sparks or short circuits, potentially resulting in an explosion. A spark or an explosion may cause serious injury or death.
Do not allow the battery posts or terminals to come into contact with skin.
The posts and terminals contain lead and lead compounds, which are toxic.
Always wash hands thoroughly after handling the battery. Excessive exposure to lead may cause long-term illness.
Do not allow battery electrolyte to come into contact with fabrics or painted surfaces. If battery electrolyte comes into contact with any surface, the surface should be washed down immediately with plenty of clean water. Failure to do so may result in damage to the affected surface.
An Absorbed Glass Matt (AGM) battery is fitted to the vehicle.
AGM batteries are sealed for life and require no maintenance. Do not attempt to open or remove the top from an AGM battery. Doing so can cause damage to the battery.
Note: If the vehicle is not being used regularly, make sure that the 12V battery remains connected, and in a sufficiently charged state, during the storage period.
READ NEXT:
Connecting jump leads
Remove all metal jewelry before
working on, or near, a battery or boost
terminals. Never allow metal objects or
vehicle components to come into
contact with the battery or boost
terminals. Metal obje
Removing the vehicle battery
Battery disconnection, removal, and
replacement should be carried out only
by qualified personnel. Consult a retailer/
authorized repairer.
Battery removal and refit should be carried
out only by qu
Battery monitoring system
Only start the engine if it is safe to do
so. Failure to do so may lead to a
collision, potentially resulting in serious
injury or death.
The Intelligent Power System
Management (IPSM) continuously m
SEE MORE:
Steering Linkage
SPECIFICATIONS
COMPONENT TORQUE LOCATION
COMPONENT TORQUE LOCATION
DIAGNOSIS AND TESTING
For additional diagnosis and testing information, refer to the relevant
Diagnosis and Testing section in the workshop
manual.
CAUTION:
Diagnosis by substitution from a donor vehicle is NOT acceptable. Subst
Front Bumper
REMOVAL AND INSTALLATION
REMOVAL
CAUTION:
Make sure that the vehicle paintwork is protected.
NOTE:
This procedure contains some variation in the illustrations depending
on the vehicle specification, but the
essential information is always correct.
This procedure contains illustrations showing
