Land Rover Defender manuals

Land Rover Defender: Safety precautions

Make sure that following warnings have been read and understood. Failure to observe the warnings could result in an accident, leading to serious injury or death.

Do not smoke, use an exposed flame, or cause sparks while refueling.

Avoid exposing the fuel gases to any potential sources of ignition.

Switch off the engine when refueling, as it is both a source of extreme temperature and electrical sparks.

When refueling, switch off any personal electronic devices such as cell phones or music players.

Take note of all warnings and instructions given on the label affixed to the inside of the fuel filler flap.

The fuel system is designed to make sure that spillage does not occur. Do not attempt to fill the tank past its maximum capacity.

Make sure that the fuel filler nozzle is fully inserted into the filler neck. If the nozzle is inserted loosely, fuel spillage may occur.

When refueling, make sure that all of the windows, doors, and the panoramic roof are fully closed. Use extreme care and caution if young children or animals are in the vehicle.

Only use containers specifically designed for carrying fuel, and always remove them from the vehicle to fill them.

READ NEXT:

 Gasoline engined vehicles

Use high quality fuel. Low quality fuel can damage the engine and reduce engine performance. Do not use leaded fuels, fuels with lead substitutes, e.g., manganese-based, or fuel additives. The vehic

 Fuel filler flap

Make sure the relevant safety warnings have been read and understood before refueling the vehicle. The fuel filler flap is located on the right side of the vehicle, at the rear. To operate, proceed

 Fuel filler

Make sure the relevant safety warnings have been read and understood before refueling the vehicle. Check the fuel pump information carefully, to make sure that the correct fuel is used to refuel the

SEE MORE:

 Glovebox

REMOVAL AND INSTALLATION REMOVAL CAUTION: Do not use excessive force to remove the component. Make sure that all fixings are fully released. NOTE: This procedure contains illustrations showing certain components removed to provide extra clarity. This procedure contains some variation in the il

 Loadspace Partitions

LOADSPACE PARTITIONS - PART NUMBER: 90: VPLES0544, 110: VPLES0545, VPLES0546, VPLES0547, VPLES0611, VPLES0612 REMOVAL AND INSTALLATION WARNING: Accessories which are not correctly installed can be dangerous. Read the instructions carefully prior to installation. Comply with instructions at all time

© 2010-2025 Copyright www.lrdefender.org