Land Rover Defender: Exterior Lighting
SPECIFICATIONS
Torque Specification
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
COMPONENT TORQUE LOCATION
.png)
.png)
READ NEXT:
COMPONENT LOCATION
COMPONENT LOCATION - 1 OF 4 - FRONT LAMPS
NOTE:
Vehicle with 5 doors is shown, vehicle with 3 doors is similar.
Headlamp assembly (quantity 2)
Rain/light sensor
Image Processin
LIGHT EMITTING DIODES HEADLAMPS WITH DAYTIME RUNNING LAMP
NOTE:
Vehicle with 5 doors is shown, vehicle with 3 doors is similar.
Left installation is shown, right installation is similar.
Headlamp
TAIL LAMP OPERATION - REST OF WORLD
Rear position lamp ON
Stop lamp ON
Turn signal indicator ON
Reverse lamp ON
TAIL LAMP OPERATION - NORTH AMERICAN SPECIFICATION
Tail lamp ON
Stop lamp ON
SEE MORE:
REMOVAL AND INSTALLATION
MATERIALS
GENERAL EQUIPMENT
PART(S)
REMOVAL
WARNING:
If installing a new brake disc, install new brake pads.
CAUTION:
Brake discs must be renewed in pairs.
NOTE:
This procedure contains illustrations for left side components, right
side components are similar.
This p
Make sure the relevant safety warnings
have been read and understood before
driving the vehicle.
The blind spot monitor system monitors
an area adjacent to, and approximately
28 ft (8.5 m) behind, the vehicle. When
the system detects an overtaking vehicle,
the amber warning icon (1):
Flashes if
© 2010-2025 Copyright www.lrdefender.org
